2 In 1 USB Endoscope Camera for Android/Windows, 8mm

2 in 1 USB endoscope camera adopts a 2MP CMOS inspection camera with 1280*720P resolution, 70° visual angle and 4-8cm focal length. It can satisfy certain basic requirements of car maintenance and cleaning. The power supply comes from the USB port of smartphone or PC. So it no needs to recharge anymore.

Features:

• 2.0MP waterproof CMOS camera with shell diameter 8mm
• Display resolution of images and video is 640*480P or 1280*720P.
• 2 in 1 USB (USB/micro USB) connector for most of the smartphone and PC
• LED lights adjustable switch and camera button, simple operations
• Widely used in automotive repair/ maintenance/ cleaning, air conditioner and pipeline inspection

Specification:

Tips: How to use the endoscope to observe the internal condition of the cylinder?

1. Blow off the dirt around the spark plug (or fuel injector) of the engine with compressed air.
2. Remove the spark plug or fuel injector. Crank the crankshaft by hand to make the tested piston at the top dead center position.
3. Gently insert the semi-rigid cable of the endoscope camera into the spark plug base hole.
4. Turn on the LED lights switch, adjust the insertion depth of the cable and turn the endoscope to observe within 360°. Adjust the light intensity so that the image can be seen clearly.
5. When there are signs of contusion on the cylinder wall, it should be carefully observed and photographs can be taken if necessary.
6. After the observation is completed, the LED lights should be turned off in time, and the camera lens and other components should be cleaned with lens paper.