Whosale Hog Ring Pliers at economical price. Constructed with manganese steel and engineering plastic handle, the hog ring pliers are about 165mm in length and 20mm jaw opening, to suit most sizes of hog rings 3/4, 1/2, 3/8 inch. With spring-loaded design, the pliers is easy to use and labor-saving, best for upholstery, cage assembly, dead angle bundle, solder joint welding repair, etc.
Specification
| Model |
T-BLQ-XM0449 |
| Material |
Manganese Steel + Engineering Plastic Handle |
| Overall Length |
165mm (6-1/2 inch) |
| Jaw Capacity |
20mm |
| Weight |
203g |
Note: * The sizes are approximate.
Dimemsion Drawing
Tips: 4 tips for electricians using pliers
1. The pliers should be operated with the right hand, with the jaws facing inward to facilitate the control of the cutting part of the pliers. The little finger can be extended between the two handles to be against the handles, thus making it flexible to separate the handle when the pliers jaw is open.
2. The cutting edge of lineman’s pliers can be used to cut the rubber or plastic insulation layer of flexible wire, can also be used to cut electric wire, iron wire. When used for cutting No. 8 galvanized iron wire, the blade should be applied to cut a few times around the surface, and then just with gentle pull, the wire was cut. The side cutter can be used to cut thicker wires, steel wire and other hard wire.
3. When bending the wire connector with long-nose pliers, bend the wire to the left first, and then bend it to the right in a clockwise direction close to the screw
4. With insulated plastic cover more than 500V, the pliers can be used to cut live wire. Do not throw it in use, so as not to damage the insulation plastic cover. Do not use pliers to shear double live wire, which will lead to short circuit. Do not use pliers as a hammer.
