Hot Melt Glue Gun

Wholesale low price hot melt glue gun with high temperature or dual temperature. 20W/25W portable hot glue gun for 7mm hot glue sticks and 60W/100W/200W/300W industrial hot glue gun for 11mm hot glue sticks. Aluminum nozzle and copper nozzle are available. High quality, high efficiency and energy saving, it is your best choice to buy non drip hot melt glue gun on Tool.com.

Hot Melt Glue Gun

A hot melt glue gun has a variety of nozzles with accurate interrupted glue when you use it, which can meet the requirements of different production lines. It has a unique filter that is good for cleaning. Generally, a hot melt glue gun will not deform working for a long time under the 300℃, so the nozzle is durable. It has different ways of spraying glue, such as spiral, strip, dot, mist, fibrous shape, which is available for different industries. Therefore, the hot glue gun widely applies to bonding products with hot melt sticks of electronics factories, food factories, packaging factories, etc.

Advantages

• The hot melt glue gun has a flexible nozzle after precision processing, which meets the different assembly lines.
• A sealed structural assembly is inside of the hot melt glue gun to make sure it runs steadily.
• The hot glue gun has a unique and flexible filter that is more easier to clean and replace, which effectively reduce the nozzle blockage.
• A flexible nozzle can accurately control the amount of glue and it can adjust the different spray width at any time according to your requests.
• The shell and trigger are made of engineering plastic, wear resistant and durable.

How to Use

• Insert a glue stick through the hole in the back of the hot melt glue gun and insert it to the bottom.
• Check whether the power cord is intact and the bracket is equipped before the hot melt glue gun lugged in.
• Turn on the power switch after the hot melt glue gun is connected to the power supply. The indicator light will go on at the same time.
• Preheat for 3-5 minutes before you use it. But it needs to adjust the preheating time, according to the temperature and power of the hot glue gun.
• Generally, when the hot glue sprays from the nozzle of the glue gun, you can use it.
• That’s all, take the hot melt glue gun and aim the nozzle to the items. Press the trigger to squeeze glue, then you could adhesive objects.
• If you don’t use the hot glue gun, turn off the power. Don’t pull out the glue stick inserted in the glue gun lest to damage it.

Applications

A hot melt glue gun is widely used for fastening products, such as bags, electronic devices, textiles, craft ornaments, cartons and so on, which meets the needs of different industries.

Notices

• Service voltage is 100-240V and frequency is 50-60Hz.
• The corresponding hot glue sticks should be selected according to the power. If you use glue sticks of different sizes or types, the glue gun may be damaged due to the backflow of melt glue.
• The temperature of the nozzle of the hot melt glue gun and the melting glue is high, please do not touch with your body. It is forbidden to use in inflammable and explosive occasions.
• When the glue gun is working, it is not allowed to lift the hot glue gun, and the gun nozzle should not be pointed upwards. If the glue gun doesn’t spray glue for 15 minutes, please cut off the power supply, lest the glue to melt back and damage the glue gun.
• Due to the durable material installed in the glue gun, it may emit smoke when used for the first time. The smoke will disappear automatically after 30 minutes of use.
• Always keep the hot melt glue gun clean to ensure that the glue stick can be inserted into the gun barrel smoothly.
• It is forbidden to pull the glue stick from the tail of the hot melt glue gun.
• The hot glue gun should be placed in a ventilated and dry place when you don’t use it. It is prohibited to put it in a damp place or a place where children can get it.
• The hot melt glue gun must be placed on its bracket when it’s not used.
• If the power cord needs to be replaced, it must be replaced by relevant professionals who meet the maintenance requirements of electrical and electrical products.