All Categories
    Menu Close

    Manual Grease Gun 400CC

    400cc capacity hand grease gun features a vent valve, a comfortable handle, a pull rod, a 130mm metal tube connected sharp nozzle and a 270mm rubber tube connected flat nozzle. Manual grease gun is made of steel pipe, with 56mm diameter, 370mm length and 1.3kg weight.
    SKU: T-MGG-400CC
    Wholesale Price - The more you buy, the more you save
    3% OFF
    5% OFF
    10% OFF
    This product has a minimum quantity of 5
    i h
    Free shipping
    Delivery date: 6-12 days

    Manual grease gun 400cc with 370mm length, 56mm diameter.


    Model T-MGG-400CC
    Shipping weight 2kg
    Capacity 400cc
    Material of gun body Steel pipe
    Grease gun diameter 56mm
    Grease gun length 370mm
    Rubber tube length 270mm
    Metal tube length 130mm
    Packing included 1 * grease gun
    1 * rubber tube
    1 * metal tube
    2 * flat nozzles
    2 * sharp nozzles

    3 tips for using manual grease gun

    1. If there is a tie rod, you can pull the rod several times so that the air inside can mix with the grease, and the problem of reducing the volume of a single bubble may be solved, but the effect is not very good for every time.
    2. The most effective method is the deflation method, but this requires hardware support. Some grease gun bodies are designed with exhaust ports. When you slowly open the exhaust screw, the air inside will come out.
    3. The last one is the ultimate skill, and it has been tried and tested. When there is air inside and cannot grease, just turn the threaded pipe between the grease gun body and the pump body a few times or back and forth (preferably turning and pressing at the same time) to ensure your success. The reason is also very simple, that is, when rotating, the air bubbles inside also rotate to the other side, the original part is filled with grease, and the problem is solved.
    0.0 0
    Write your own review Close