900cc pneumatic grease gun equips a 9m air pipe, safe working pressure range 10000~12000 PSI, optional steel pipe/PC gun body, optional rod with ring or handle.
Specification:
Model |
T-PGG-900CC-1 |
T-PGG-900CC-2 |
T-PGG-900CC-3 |
Shipping weight |
3.5kg |
3.5kg |
3.5kg |
Capacity |
900cc |
900cc |
900cc |
Working mode |
Continuous-shot |
Continuous-shot |
Continuous-shot |
Working pressure range |
10000~12000 PSI |
10000~12000 PSI |
10000~12000 PSI |
Material of gun body |
Steel pipe |
Steel pipe |
PC |
Type of rod end |
Ring |
Handle |
Handle |
Grease gun diameter |
62mm |
62mm |
62mm |
Grease gun length |
500mm |
500mm |
500mm |
Rubber tube length |
270mm |
270mm |
270mm |
Metal tube length |
130mm |
130mm |
130mm |
Air pipe length |
9m |
9m |
9m |
Packing included |
1 * grease gun 1 * rubber tube 1 * metal tube 1 * flat nozzle 1 * sharp nozzle 1 * air pipe |
1 * grease gun 1 * rubber tube 1 * metal tube 1 * flat nozzle 1 * sharp nozzle 1 * air pipe |
1 * grease gun 1 * rubber tube 1 * metal tube 1 * flat nozzle 1 * sharp nozzle 1 * air pipe |
Tips: Pneumatic grease gun FAQ
Question 1: What should I do if the pneumatic grease gun freezes in winter?
Answer 1: There are 3 methods to solve this situation.
- Seal the grease gun to a watertight state, and then place it in warm water to thaw.
- Or use the warm wind function of a hair dryer blowing to thaw.
- Or put it in a warm place.
Question 2: What should I do if the pneumatic grease gun doesn't inject grease?
Answer 2: The first reason may be that the grease nozzle is blocked. Try to use a needle to pierce through it. The second reason may be that there is a leak in the air tube, which needs to be checked. The third reason is that air has entered the grease gun. It needs to exhaust air with the vent valve.
Question 3: How to deal with the grease muzzle easy to leak grease and sand?
Answer 3: Use Teflon tape to seal the parts that are prone to grease leakage.
Question 4: What should I do if the pneumatic grease gun cannot be turned off?
Answer 4: When the pneumatic grease gun is in use, the grease gun keeps injecting grease. The grease gun cannot be closed properly. generally separate the grease gun from the air tube first, so that the air pressure will dissipate and the grease gun will stop. Using this method, it is best to prepare a container for extra grease to avoid waste.