2 Ton Automotive Floor Jack, Low Profile

2 ton automotive floor jack, low profile structure, hydraulic principle, 195mm lift height, CE/ GS/ TUV certification.

Specification:

Tips: Why the floor jack cannot reach the maximum height or be lifted?
Solution 1: Check whether the oil drain valve is completely closed (whether the drain valve handle is fully tightened).
Solution 2: Tighten the oil drain handle and loosen it by half a turn, press the handle several times to discharge the air.
Solution 3: Dust enters the hydraulic system or the hydraulic oil in the oil cylinder is too little. Open the bolt of the oil pump refueling hole, change the hydraulic oil or fill up the hydraulic oil, tighten the refueling hole bolt, and then tighten the oil drain handle and loosen it again by half a turn. Finally press the handle several times to exhaust air.