||0-400 rpm/0-1400 rpm
|Wood Drill Capacity
|Steel Drill Capacity
Application: Wood/steel/ceramic tile drilling or screws screwing for home renovation, lighting installation, furniture installation, manual DIY, and other industrial or commercial use.
Details Diagram of Cordless Drill
Tips: Adjustment and use for drill bit of cordless drill.
1. Drill bit installation and disassembly.
Install drill bit: After inserting drill bit into chuck, hold the ring tightly and screw sleeve backwards (viewed from the below, it is clockwise). During operation, if sleeve becomes loose, tighten it again. When tightening sleeve, tightening force will become stronger.
Disassemble drill bit: hold the ring firmly and loosen sleeve to the left (viewed from the front, it is counterclockwise).
2、Drill bit using.
When using cordless drill, drill bit cannot be stuck. If it gets stuck, turn off power supply immediately, otherwise the battery will burn out.
3. Drill bit maintenance.
If the drill bit is dirty, wipe it with a soft cloth or a damp cloth moistened with soapy water. Do not use chlorine solution, gasoline, or thinner to avoid melting of the plastic part.