Search
All Categories
    Menu Close

    10,000 psi Hydraulic Foot Pump, 0.6~1.5k cc Oil Reservoir

    Hydraulic foot pump with pedal for sale. Double-acting output. 2-stage pressure, high pressure 10,000 psi (700 kg/cm²), low pressure 284 psi (20 kg/cm²), optional oil reservoir 600cc/700cc/900cc/1,500cc. Optional pressure gauge configuration and oil tube length.
    SKU: T-HFP-1500
    *
    *
    *
    $286.69
    i h
    Free shipping
    Delivery date: 6-12 days

    The hydraulic foot pump is operated and controlled by pedal. Oil output is high and low 2-stage. It has double-acting, small size, portable and convenient for use, price is affordable.

    Specification

    Model T-CFP-800-I T-CFP-800-A T-CFP-700D T-CFP-700D-1
    Max. Output Pressure kg/cm² 700
    psi 10,000
    bar 689
    Pressure Rating Low Pressure 20 kg/cm²
    High Pressure 700 kg/cm²
    Oil Amount/min Low 13cc 13cc 12.26cc 12.26cc
    High 2.3cc 2.3cc 2.26cc 2.26cc
    Oil Reservoir Capacity 600 cc 700 cc 900 cc 1,500 cc
    Frame Material Iron Aluminum Iron Iron
    Default Oil Pipe Length 2m 2m 2m 2m
    Size mm 620*220*280 660*200*300 450*150*200 450*150*200
    inch 24.4*8.7*11 26*8*11.8 17.7*6*8 17.7*6*8
    Weight 15 kg 10 kg 12 kg 13 kg

    Features

    • The hydraulic foot pump can be connected to a variety of tools, including cutting machine, punching machine, bending machine, angle steel cutting tool, jack, puller, crimping tool, etc.
    • Two-stage oil output, large quantity and fast speed. Easy to carry, not affected by electricity. The high-pressure pipe can be extended and used.
    • Functions of hydraulic foot pump is the same as the electric and hand pump.

    Hydraulic Foot Pump Structure Diagram

    Structure of 10,000 psi Hydraulic Foot Pump, 0.6~1.5k cc Oil Reservoir

    • Bleed nut
      When using hydraulic foot pump, must loosen this nut to prevent the oil reservoir from being sealed. The vent port is the oil filler.
    • Optional pressure gauge
      According to requirements, a shock-resistant pressure gauge can be added on oil outlet of the hydraulic foot pump head, to observe pressure changes at any time.
    • Oil return switch
      Tighten the oil return valve clockwise first, then step on the pedal repeatedly. Hydraulic foot pump starts to work and the pressure gradually rises. Tighten the oil return valve clockwise when working. Loosen the oil return valve counterclockwise when releasing pressure.
    • Quick female connector
      Hydraulic oil tube is equipped with a thread quick connector. Thread specification is 3/8”.

    Hydraulic Foot Pump Usage Steps

    1. Connect the high-pressure oil pipe female joint of the main pump and the male joint of the sub-machine oil pressure cylinder, and tighten them.
    2. Tighten the oil return switch of the pump clockwise, step on the pedal repeatedly to advance piston until the work is completed.
    3. After completion, loosen the oil return switch counterclockwise to reset the piston.
    0.0 0
    *
    *
    • Bad
    • Excellent