Wholesale 53-Piece 1/4-in Drive Ratchet & Socket Set at good price. This tool set includes metric standard and deep sockets, common socket bits, hexy keys, U-joint, extenion bar, sliding bar, ratchet and spinner handle, and so on. The 1/4-in drive reversible quick-release ratchet provides extra efficiency and easiness for performance with ergonomic soft-grip handle. This mechanics tool set is greatly suitable for bicycles, electric bike, motorcycles, home repair, etc.
Specification
| Model |
T-RS-53RSS |
| Drive Size |
1/4 inch (6.3mm) |
| Measure Type |
Metric |
| Material |
Chrome vanadium steel, high carbon steel, etc. |
| Dimension |
270*200*55mm |
| Weight |
1.7kg |
| Applications |
Bicycles, E-bikes, motorcycles, home repair, etc. |
| Package Included |
① 21 x Bit sockets:
Torx bit sockets: T10, T15, T20, T25, T30, T40
Hex bit sockets: 3, 4, 5, 6, 7, 8mm
Slotted bit sockets: 4, 5.5, 7mm
Phillips bit sockets: PH1, PH2, PH3
Pozidriv bit sockets: PZ1, PZ2, PZ3
② 7 x 1/4" Metric 6-point deep sockets 6, 7, 8, 10, 11, 12, 13mm
③ 13 x 1/4" Metric 6-point sockets 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm
④ 1 x 1/4” Ratchet handle
⑤ 1 x 1/4” Spinner handle + Sliding T bar
⑥ 3 x 1/4” Extension bar 50mm & 100mm + Flexible extension bar 150mm
⑦ 1 x 1/4” Universal joint
⑧ 1 x 1/4” Adapter
⑨ 3 x Hex key 1.5, 2, 2.5mm
⑩ 1 x Carrying case |
Package Included
Tips: Ratchet & socket set - sliding T-bar introduction
The sliding T-bar is a T-shaped rod, which is a special handle for the socket, and the horizontal rod can be adjusted by sliding. By sliding the square drive part, the ratchet and socket can be used in two ways.
The square drive head is transferred at one end to form an L-shaped structure, thereby increasing the arm force and achieving the purpose of loosening or tightening fasteners, similar to the L-shaped wrench. The square drive part is located in the middle position, forming a T-shaped structure. Two hands are exerting force at the same time, which can increase the working speed, but a large working space is required.
When the operating torque is too large, it is forbidden to install a socket on the handle of the slide bar or hit it with a hammer, otherwise the tools or bolts will be damaged.
