All Categories
    Menu Close

    1/2" Air Impact Wrench, 600 ft/lb, 7500rpm

    Cheap 1/2" (half inch) air impact wrench for sale, maximum torque 600 ft/lb (850Nm), no load speed 7500rpm, air inlet size 1/4 in., working pressure 0.6 – 0.8 MPa. With speed-control switch, ergonomic handle, best for replacing tires on small cars and tightening or loosening mechanical equipment bolts.
    SKU: T-AIW-12600
    Wholesale Price - The more you buy, the more you save
    3% OFF
    5% OFF
    10% OFF
    i h
    Free shipping
    Delivery date: 6-12 days


    • 1/2 inch air impact wrench is made from high quality material after heat treatment, high hardness and durability.
    • The air impact gun is lightweight and designed with an ergonomic handle, so you can operate it easily.
    • 600 ft/lb (850Nm) high torque output not only work efficiently but also save your time and energy.
    • A forward/reverse speed-control switch on the back of the air impact wrench, easy to change the direction.
    • Built-in stainless steel filter effectively prevents debris in the air from entering to avoid the air impact wrench damage.
    • Best air impact for small cars and mechanical equipement to remove and install the lug nuts and bolts.


    Model T-AIW-12600
    Drive Size 1 /2 inch (12.7mm)
    Working Pressure 85 - 115 PSI (0.6 - 0.8 MPa)
    Air Inlet Size 1/4 inch (6.35mm)
    Hose Size 13mm
    Bolt Capacity 18mm
    Air Consumption 0.5 M3/Min
    Maximum Torque 600 ft/lb (850Nm)
    No Load Speed 7500rpm
    Power Source Air Powered
    Body Dimension 203mm * 185mm
    Weight 3.3kg
    Package Included Selection 1 PC Air Impact Wrench
    1 PC Hex Key
    1 PC Air Inlet Connector
    1 PC Oil Bottle
    1 PC Air Impact Wrench
    1 PC Hex Key
    1 PC Air Inlet Connector
    1 PC Oil Bottle
    1 PC Extension Bar, 125mm
    8 PCS Impact Socket Set, 13mm * 2, 14mm, 15mm, 17mm, 22mm, 19mm, 24mm

    Note: If you cannot find 1/2" air impact wrench with required torque, please feel free to contact us.


    1/2 inch Air Impact Wrench 600 ft/lb Details

    1/2 inch air impact gun details
    Half inch air impact gun details

    Tips: Air Impact Wrench Troubleshooting

    Failures: internal leakage, slow speed, stuck and weak.


    1. Connect the air impact wrench to the air source and don’t press the trigger to observe if the exhaust port is leaking or rotating by itself. Most of the internal leakage is caused by the damaged part, just replace it.
    2. Connect the air impact to the air source to test whether the rotation unable or jammed. Check whether the hammering unit parts are worn or broken. Check whether there is dirt or rust on the cylinder block, the blade is too long and the rotor on the rear cover is fitted tightly. And then replace the damaged parts and clean them.
    5.0 1
    Write your own review Close
    Customer | 7/21/2021 1:07 AM
    perfect wrench
    I found a damaged parts and the air impact wrench never failed to remove any bolt or nut from my car. I used 1/4 inch air inlet with this wrench, no problems at all!