Features
1. 1000 lumens LED flashlight is made of high quality aluminum alloy, sturdy and durable enough for long time daily using.
2. Skid-proof design and daily waterproof design but it can't dive into the water.
3. 5 different settings make the LED torch essential for all low-light situations.
4. The adjustable hand rope is designed for conveniently carrying around.
5. The rechargeable flashlight has USB interface, easy for charging.
6. Suitable for most indoor use like home maintenance and outdoor activities like hunting, cycling, climbing, camping and so on.
Specification
Model |
T-FL-1000 |
Bulb Type |
L2 |
T6 |
P50 |
Light Color |
White |
Red/Green |
White |
Size |
14.9cm*3.7cm*2.8cm |
14.9cm*3.7cm*2.8cm |
14.9cm*3.7cm*2.8cm |
Net Weight |
146g |
146g |
146g |
Material |
Aluminum Alloy |
Aluminum Alloy |
Aluminum Alloy |
Lumens |
1000 |
1000 |
1000 |
Beam Distance |
500m |
500m |
500m |
Focus |
Fixed Focus |
Zoom |
Zoom |
Lighting Modes |
5 Modes (High-Medium-Low-Fast Flash-Slow Flash) |
5 Modes (High-Medium-Low-Fast Flash-Slow Flash) |
5 Modes (High-Medium-Low-Fast Flash-Slow Flash) |
Battery Type |
18650 |
18650 |
18650/26650 |
Power |
10W |
10W |
10W |
Voltage |
3.7V |
3.7V |
3.7V |
Runtime |
4-12 hours |
4-12 hours |
4-12 hours |
Details


Tips: 1000 Lumens LED Rechargeable Flashlight Troubleshooting
- The LED flashlight has electricity but doesn’t work.
Situations:
1. The signal indicator on flashlight switch button can be lighted, but the light source is not bright.
2. The flashlight has no reaction, the light source is not bright.
3. The light source is bright, but the brightness is too weak.
Solutions:
The reason of the problems mentioned above is the circuit board and the light source of the flashlight is aging or damaged, you could replace the circuit board and the light source with the same specification.
- The LED rechargeable flashlight doesn’t charge.
Situations:
1. Use a wrong charger or the charger is damaged.
2. The signal indicator has no reaction when you plug in the charger.
3. The flashlight shows it’s fully charged, actually it’s not.
Solutions:
1. Try to plug the charger into another recharge flashlight of the same type.
2. Contact with the charger positive pole and negative pole in a short time and observe if the signal director to change.
- The charger is not damaged, but it doesn’t work.
Solutions:
1. Check whether there is thick dust or debris, or the charging thimble is not in the center so that can’t contact normally.
2. Remove the charging tail cover to check whether the internal wires are off.
- The flashlight can be bright when charged, but can’t be bright without charging.
Solutions:
This situation is caused by batteries damaged or aging, you just need to change batteries.