126 Piece 1/4" Drive Socket Set

126-piece 1/4" drive socket & ratchet set, chrome-vanadium steel material, good for car maintenance.

Specification:

Drive socket set details:

Tips: Sliding T-bar and spinner handle

1. Sliding T-bar
   The sliding T-bar is a special matching handle for the socket set. The crossbar can be adjusted by sliding. By sliding the square tenon part, the sliding bar can be used in two ways.
   The square tenon is located at one end to form an L-shaped structure, thereby increasing the torque and achieving the purpose of disassembling or tightening the bolt. It is similar to L-shaped wrench.
   The square tenon part is in the middle position, forming a T-shaped structure. Then operator can use two hands at the same time, which can increase the speed of disassembly, but the requested working space is very large.
   When the disassembly torque is too large, it is forbidden to install a sleeve on the handle of the sliding T-bar or hammer it with a hammer. Otherwise the tools or bolts will be damaged.
2. Spinner handle
   The spinner handle is also a automotive socket set matching handle, which can be matched with the socket head and the bit socket head. It is similar to the screwdriver handle. The spinner handle can quickly turn the bolts and screws, mainly used to screw the bolts and screws to the end. Most of the handles are 1/4" drive size, which cannot screw with high torque.
   The handle of the spinner handle can be connected to a ratchet wrench or other handles to increase the torque during disassembly or tightening.
   After the ratchet wrench is added to the handle of the spinner handle, take care to prevent excessive torque of the socket head and bit socket head at the front end from damaging the bolt or the tool itself. It is forbidden to hammer the tail of the spinner handle to loosen the bolt. Otherwise the rubber handle will be seriously damaged.