The electric bench sander is a combination of belt sander and disc sander, which has multifunction and small size, can be used on the table or floor. Applicable materials are metal, wood, aluminum, plastic, etc.
Specification
Model |
T-EBS-4368 |
Motor Power |
1-1/5 hp (900W) |
Rated Voltage |
220V, 50Hz |
Rated Current |
4.1A |
Sanding Belt Size |
4 x 36 (100 x 914mm) |
Sanding Disc Diameter |
8 inch (200mm) |
No-Load Speed |
2,850 rpm |
Workbench Tilt Angle |
0~45° |
Weight |
23kg |
Attachment |
sanding belt*1, sanding disc*1, dust exhaust outlet*1, dust bag*1 |
Belt and Disc Sander Functions
 |
 |
 |
Wood sanding on the workbench vertical to the sanding disc |
Sanding the cutting surface of aluminum materials |
PVC plastic polishing |
Belt and Disc Sander Structure Diagram

Belt and Disc Sander Dimensions

Sanding Belt Installation for Belt & Disc Sander Arm
 |
 |
1. Loosen the screws on the transparent shield and remove the shield. |
2. Loosen the three screws on the cover plate and remove the cover plate. |
 |
 |
3. As shown in the figure, press here forward to remove the sanding belt. |
4. Replace a new sanding belt and adjust it in place, then the belt sander can be used. |
Sandpaper Installation for Belt & Disc Sander Sanding Disc
 |
 |
1. Loosen the screws on the transparent shield and remove the shield. |
2. Remove the old sandpaper and paste the new sandpaper. |