All Categories
    Menu Close

    75Nm Inline Air Screwdriver, 1/4", 8000rpm

    1/4 inch air inlet straight air screwdriver at afordable price, 75Nm max torque, 8000rpm no load speed, 8-10 bolt capacity. Reversible air pneumatic screwdriver has adjustable 3-speed setting, forward / reverse switch, self-locking collet matched with different screwdriver bits.
    SKU: T-AS-75N
    Wholesale Price - The more you buy, the more you save
    5% OFF
    7% OFF
    10% OFF
    15% OFF
    i h
    Free shipping
    Delivery date: 6-12 days

    Low cost inline pneumatic screwdriver features 1/4" air inlet, free speed of 8000rpm and a maximum torque of 75Nm which helps to ensure the machining accuracy of the workpiece. It is designed with no limit speed regulation, double-hammer construction for high torque and efficient operation. Apply to automobile industry, furniture, decoration industry and assembly line work.


    Model T-KP-809
    Type Inline impact air screwdriver
    Max Torque 75Nm
    No Load Speed 8000rpm
    Air Inlet 1/4" (6.35mm)
    Collet Size 1/4"
    Bolt Capacity 8-10mm
    Air Hose Inner 6.5mm
    Working Pressure 90 psi
    Average Air Consumption 0.22m3/min
    Overall Length 240mm
    Weight 1.3kg
    Packing Included 1 * Air Screwdriver
    1 * Mini Screwdriver Bit
    1 * Hook


    75Nm 1/4" 7000rpm pneumatic screwdriver details

    Tips: Special oil must be added to air screwdriver after use for some time

    Air screwdrivers are driven by compressed air, suitable for disassembly and assembly of various screws, and are widely used in the manufacturing industry. However, the pneumatic screwdriver must be added with special oil after using it for a period of time to lubricate its internal parts and remove dirt and extend its service life. Under normal circumstances, special pneumatic tool lubricants are used for maintenance.

    The part where the pneumatic screwdriver is refueled is at the air inlet, and the air must contain sufficient lubricating oil so that the air motor in the tool can be fully lubricated (a piece of white paper can be placed in the exhaust of the tool to check for oil stains. Normally there is oil stains ). It is best to avoid air containing moisture as much as possible at the air inlet. It is not appropriate to use compressed air without an air dryer.


    0.0 0
    Write your own review Close