90Nm 8000rpm straight air screwdriver for sale at competitive price. It comes with 1/4” air inlet, 10-16mm bolt capacity, 1/4” self-locking collet, fitted with forward / reverse switch and speed-control switch, applicable to the production line, household electrical appliances and the repair work of small engine.
||Inline air impact screwdriver
|No Load Speed
|Air Hose Inner
|Average Air Consumption
||1 * Air Screwdriver
1 * Mini Screwdriver Bit
1 * Hook as picture show
4 safety tips for using air tools
- Before using air tools, please read the product manual carefully.
- The air pressure should not exceed the maximum operating pressure, otherwise the service life of the tool itself will be greatly reduced.
- Be sure to use a clean air source. If necessary, install a three-point control valve or an oil-water separator to remove water impurities in the air source.
- The air tool needs to be lubricated before and after use. Add 3~5 drops of special oil for pneumatic tools from the air inlet each time. Start the tool, rotate forward and reverse for 20-30 seconds.