Pneumatic rivet nut gun we provide can drive M5, M6 aluminum and iron rivet nuts to work. But it is not recommended to spin the stainless steel nutserts. Designed with self-locking collet, the air rivnut tool is simple and convenient to operate, which allows you to improve work efficiency. It is used for riveting all kinds of sheet metals, plastic pipes, equipment cabinets and other thick material.
|No Load Speed
||0.6 - 0.8MPa
|Air Inlet Size
||210 * 175mm
Tips: How to Use a Pneumatic Rivet Nut Gun?
1. Hold a nutsert with one hand, and press the forward switch of the pneumatic rivet nut gun with another hand. Spin the rivet nut onto the thread mandrel tip.
2. Insert the thread mandrel tip of the rivet nut tool and the rivnut in the hole of the workpiece.
3. Press the forward switch of the air nut riveter again, pull the nutsert out of shape through rotating the threaded mandrel tip.
4. When the rivet nut is installed, press the reverse switch to remove the thread mandrel tip. The riveting is finished.