All Categories
    Menu Close

    Rotary Hammer with SDS Drill, 500W, 20/22mm

    Rotary hammer with SDS drill for sale. Rated power 500W, no-load speed 0-1060rpm, hammering bpm 0~3900/min. Drilling diameter 20mm/22mm for selection. Integrating 2 functions of electric drill and electric hammer, high quality and good price.
    SKU: T-RTHM-500
    Wholesale Price - The more you buy, the more you save
    3% OFF
    5% OFF
    7% OFF
    i h
    Free shipping
    Delivery date: 6-12 days


    Rotary hammer drill has 2 switchable functions. Electric drill for drilling of metal, wood, ceramics, etc. Electric hammer for breaking in wall demolition, engineering construction, interior decoration. Standard configuration 3 SDS drill bits.


    Model T-RTHM-6020 T-RTHM-6022
    Drilling Diameter 20mm 22mm
    Function hammering, drilling
    Voltage 230V
    Frequency 50Hz
    Rated Power 500W
    No-load Speed 0-1060rpm
    Hammering Rate 0-3900bpm
    Impact Energy 1.8J 2.2J
    Weight 2.6kg 2.57kg
    Standard Accessories 3 SDS drill hammer bits (8, 10, 12*150mm), ruler, carbon brush, dust cover, tool box


    • The pure copper motor in rotary hammer provides high power, stable and efficient, low noise, high speed.
    • Precision cylinder hammering system, highly airtight and efficient hammering.
    • Spiral-type heat dissipation system, dissipate heat quickly and prevent the machine from burning out.

    Rotary Hammer Structure Diagram

    Structure Diagram of Rotary Hammer with SDS Drill, 500W, 20/22mm

    Tips: Advantages of rotary hammer conjoined gearbox design.

    • Effectively prevent oil leakage of rotary hammer body.
    • For the non-conjoined gearbox, due to screws connection, its case is easy to loosen after working for a long time. The conjoined design solves this problem.
    • Conjoined design shortens the length of joint and avoids easy breakage.
    • Connectors are small, making rotary hammer easy to disassemble and repair.
    5.0 1
    Write your own review Close
    Matthew | 10/12/2020 1:35 AM
    How to make the rotary drill jam the drill bit
    How to put the drill bit in the rotary drill? I operated for a few hours, but it couldn't block the drill bit at all.
    A manager responded to this review
    The rotary drill does require a special SDS carbide drill, which has three grooves on the shank. I pull back and press lightly on the drill bit and it will slide into the drill bit. Then, rotate the bit to make sure it is locked in place so that the operation can jam the bit.