250 PSI Tire Inflator with Pressure Gauge

250 PSI tire inflator with pressure gauge can be used for measuring tire pressure, releasing tire air and inflating tire. Optional handle type/ air tap type and 4 switchable units to show real time tire pressure, completely meets all your requirements.

Specification:

Tips: Steps of using tire inflator with pressure gauge

1. Unscrew the cap of the tire air valve.
2. Press and hold the clip of the tire pressure gauge rubber hose, insert the air chuck into the tire valve directly, right the card connected to the clip, and then loosen the clip.
3. The LCD screen of the pressure gauge will display the tire pressure value at this moment. The pressure gauge has 4 kinds of units that can be switched by key on the panel, which is convenient for different users to read the tire pressure value.
4. If it is detected that the tire pressure is insufficient, connect the air pipe of the air compressor to the air tap on the handle, and press the air blow gun trigger to start inflation.
5. If the tire pressure is too high, press the air vent valve and observe the pressure value on the display. When the tire pressure returns to the normal range, the inflation can be stopped.
6. After the inflation is completed, press and hold the clip to unplug the hose. Press the vent valve to reset the pressure gauge to zero, and screw back the tire valve cap.