Functions: Tool sharpening, drill bit grinding, cutter sharpening, metal processing, stone processing, etc.
||1/5 HP (150W)
||6 Inch (150mm)
|Wheel Hole Diameter
||brown corundum grinding wheel
Structure Diagram of Bench Grinder
Tips: Site requirements of bench grinder installation.
- Opening direction of bench grinder should be face to wall as possible, not directly facing pedestrian passage or the place where there are equipment and operators nearby.
- If bench grinder has been installed near equipment or beside passage, set a metal mesh with 1.8m height at a distance of 1~1.5m from opening position of grinder, to shield and isolate it.
- Bench grinder must not be installed in corrosive gas or flammable and explosive places.
- Bench grinder installation place should keep the ground dry.
- Adequate lighting should be guaranteed at the bench grinder use site.