Search
All Categories
    Menu Close

    Demolition Hammer

    View as Grid List
    Sort by
    Display per page
    1.7kW 7.7A Demolition Hammer

    1.7kW 7.7A Demolition Hammer

    T-DLHM-1700
    Electric demolition hammer for sale. Rated input power 1.7kW or 1.6kW for selection. Power supply 220V 7.7A or 7.3A. Maximum impact rate 1850 rpm/1550 rpm. Single hammer force 65J/45J. Configuration 1 pointed drill bit and 1 flat chisel.
    $329.23
    2.6kW 11.8A Demolition Hammer

    2.6kW 11.8A Demolition Hammer

    T-DLHM-26
    Electric demolition hammer for sale. 2.6kW or 1.8kW high power for selection, 1400bpm/1850bpm maximum impact rate. Maximum drilling diameter 65mm or 105mm. Suitable for demolition and breaking of walls, floors and concrete. Low price with high quality.
    $314.62
    3kW 13.6A Demolition Hammer

    3kW 13.6A Demolition Hammer

    T-DLHM-3000
    Reasonable price electric demolition hammer for sale. Rated input power 3kW. Rated voltage 220V, 13.6A. No-load speed 1400 rpm. Impact energy 45J. Standard configuration 1 pointed drill bit and 1 flat chisel. Heavy duty, net weight 20kg.
    $392.31
    1.85kW 8.4A Demolition Hammer

    1.85kW 8.4A Demolition Hammer

    T-DLHM-1850
    Best Electric demolition hammer for sale. Motor power 1.85kW. Rated voltage 220V, 8.4A. Maximum drilling diameter 1-1/2 inch (38mm). No-load speed 3750 rpm. Configuration 1 pointed drill bit and 1 flat chisel. Affordable price and high efficiency.
    $204.85
    1.9kW 8.6A Demolition Hammer

    1.9kW 8.6A Demolition Hammer

    T-DLHM-19
    Good price demolition hammer for sale. Motor power 1.9kW. Rated current 8.6A for 220V, 7.9A for 240V. Maximum impact rate 3600 bpm, impact energy 15J, 45mm drill chuck. Suitable for demolition and breaking of walls, floors and concrete.
    $227.38
    2.2kW 10A Demolition Hammer

    2.2kW 10A Demolition Hammer

    T-DLHM-2200
    Best Electric demolition hammer for sale. Motor power 2.2kW. Rated voltage 220V, 10A. Maximum drilling diameter 1-1/2 inch (38mm). No-load speed 3800 rpm. Configuration 1 pointed bit and 1 flat chisel. Competitive price and multifunction.
    $242.08

    Demolition hammer is another name for jack hammer (In some countries and regions, it also written as jackhammer), which is also called demolition breaker. Demolition hammer combines the functions of hammer and chisel. Match with different bits, chisels, shovel, it can be used for drilling, concrete/stone breaking, wall digging, tile removal, etc.

    Although electric jack hammer is a hand-held power tool, it is usually heavy-duty, the weight of the whole machine can reach 5kg, 10kg, or even 16kg. Its price is also more expensive than ordinary electric hammer.

    Demolition Hammer Working Principle

    Electric demolition hammer performs hammering action by driving the hammer inside it to move up and down. The hammer is first driven downward to strike backward, and then lifted backward to return the hammer to the original position and repeat the cycle. Hammering effect of electric demolition hammer depends on the amount of force applied.

    Hammering Skills

    • Where to start hammering is important to the effectiveness of demolition hammer. When working on the floor, start from the edge. If you start from the center or corner, as the debris gradually accumulates, it will cause problems in later operations. It would be better if the work could be done from the inside to the outside, because the debris will be closer to where it is needed and can be easily removed. When working on a wall, start as close as possible to the center of the wall and chisel down. The weight of the top load will cause the concrete to fall on its own.
    • Placement of the demolition hammer tip directly affects hammering effect. If the demolition hammer lip is pointed straight down or pointed into the surface to be removed, it will cause the hammer to hit the same position continuously, which will only create a hole at that position. The trick is to tilt the drill bit of demolition hammer and point downward. In this way, the lip will chip into the material instead of passing through it.