Wholesale wall chaser with laser features 5200 watt 50Hz 220V double electric motor, 140mm (5.5") saw blade diameter, 10500 rpm working speed, widely used as a multi-purpose tool in the construction industry to cut different materials. The depth and width can be adjusted to 45mm (1.8") and 72mm (2.8") respectively.
|Saw blade diameter
|Saw blade dimension
|Max. Cutting Depth
|Net Weight / Gross Weight
||7kg (15.4 pounds) / 9.5kg (20.9 pounds)
||red brick, granite, concrete, marble, rebar
- Adjustable cutting depth & wedth: Cutting groove depth and width of wall chaser can be randomly controlled. Max. cutting depth is up to 45mm (1.8"), max. cutting width 72mm (2.8").
- Easy to hold: Weight 7 kg, the handle can be rotated 90°. It can also work much effort without any assistants to increase the efficiency of work.
- Safety: The slotting machine can serve for a long life with high power 5200W 220V 50Hz double copper motors. The devices of water pump and waterproof baffles work at the same time to reduce the dust during work to take into account your health.
- Multifunction use: Widely applied and adapt to different materials, such as red brick, granite, concrete, marble, rebar. Ideal for construction workers.
Notes: User should take dustproof glasses, mask and built-in vacuum port and water pump at the same time to reduce the dust during work.
Tips: Using wall chaser grooving machine attentions
1. Check the safety of the power supply before use, bad socket and power line will cause poor contact and it will cause electric shock, fire and other accidents in serious cases.
2. During the grooving operation, the wall chaser should be kept straight and pulled back at a constant speed so as to maximize the cutting efficiency.
3. The operator should wear insulated gloves and insulated shoes when using water cutting operations so as to avoid electric shock accidents.
4. The wall chaser is a high-power cutting tool and has heavy load during working process, thereby, user should check the firmness and reliability of the connecting parts before using it.
5. When the wall groove cutting machine is performing the grooving and cutting work of the conversion angle, the protection cover should be opened and special attention should be paid to the flying sands. Otherwise, it may cause body injury in serious cases.