The end mill sharpener can separately sharpen and grind 2-flute, 3-flute, 4-flute end mills, or directly cut out the cutting edges with tungsten rods. Above Ф12mm is suitable for grinding 6-flute end mills. 2 optional grinding wheels. CBN grinding wheel for grinding white steel mill cutter, SDC grinding wheel for grinding carbide. Accurate tool setting without chipping.
||CBN (for high speed steel), SDC (for tungsten steel)
End Mill Sharpener Structure Diagram
End Mill Sharpener Effect Diagram
End Mill Sharpener Packing List
- End mill sharpener T-MCG-X7*1
- SDC/CBN grinding wheel*2
- Fixture ER collet*10
- Small Allen wrench*3 (3, 4, 5mm)
- Chuck set*2
Tips: Use end mill sharpener to grind the relief angle.
- Grind the adjustable center relief angle
Insert milling cutter fixture set into the center relief angle grinding seat hole, and gently push it to the bottom. Grind it until the grinding sound stops. Adjustable center rotation can be adjusted according to different usage of milling cutter. For example, the end mill sharpener to grind 2-flute and 3-flute milling cutters, it is needs to rotate left and right. To grind 4-flute and 6-flute milling cutters, no rotation is needed.
- Grind the second relief angle
Insert milling cutter fixture set into the second relief angle grinding seat hole of the end mill sharpener, and gently push it to the bottom. Grind it until the grinding sound stops. Then take it out, turn it 180° or 90°, and grind it in the same way until there is no sound.