All Categories
    Menu Close

    End Mill Sharpener, Ф4-Ф14mm, 200W

    Sharpener grinder for end milling cutters. Grinding range Ф4mm-Ф14mm. Power supply 220V, 200W. Rotation speed 4400rpm. Can grind end mill of 2-flute, 3-flute and 4-flute. Portable design, high precision with good price.
    SKU: T-MCG-414200
    i h
    Free shipping
    Delivery date: 6-12 days


    Model T-MCG-X1
    Grinding Range Ф4mm-Ф14mm
    Rated Voltage 220V 50/60Hz
    Motor Power 220W
    Rotation Speed 4400rpm
    Grinding Wheel CBN (for high speed steel), SDC (for tungsten steel)
    Certification CE
    Collet Accessories 6 collets (Φ4, Φ6, Φ8, Φ10, Φ12, Φ14)
    Warranty 1 year
    Dimension 35*24*23cm
    Weight 15kg


    • In addition to grinding end face, central angle and clearance angle for 2-flute, 3-flute and 4-flute end mill, it also can open the cutting edge of tungsten bar directly.
    • Compact size, small footprint, portable, suitable for milling cutter grinding work anywhere.
    • Lateral positioning adjustment, can better observe positioning effect, and tool setting is more stable and fast.

    Structure Diagram of End Mill Sharpener

    Structure Diagram of Milling Cutter Grinder, Ф4-Ф14mm, 200W

    Effect Diagram of End Mill Sharpener

    Effect Diagram of Milling Cutter Grinder, Ф4-Ф14mm, 200W

    Packing List

    Packing List of End Mill Sharpener, 200W, 14mm

    1. Drill bit sharpener grinder T-MCG-X1*1
    2. SDC/CBN grinding wheel*1
    3. ER20 collet*6
    4. Small Allen wrench*3 (3, 4, 5mm)
    5. Chuck set*2

    Tips: Positioning method for end mill sharpener fixture set.

    1. Put fixing chuck nut into the hole of length positioning seat. After making it completely tightly connected, turn clockwise to the right for positioning.
    2. Insert the tip of end milling cutter into the bottom, push it gently, and turn right when it hits the plane, then jam and position.
    3. Turn chuck seat to the right to the end and lock it.
    4. When taking out fixture set, hold the fixed chuck nut and turn it slightly to the left to take it out.
    5. Observe whether the milling cutter blade is parallel to chuck seat. If it is not parallel, repositioning is required.
    0.0 0
    • Bad
    • Excellent