The end mill sharpener can grind 2-flute, 3-flute, 4-flute and 6-flute end mill cutters. Grinding angles include end face, central angle and clearance angle. In addition, it can open the cutting edge of tungsten bar directly. It is also a end mill grinder with high grinding accuracy, adjustable point angle and adjustable grinding amount.
Specification
Model |
T-MCG-X3 |
T-MCG-X3A |
T-MCG-X5 |
Grinding Range |
Ф4mm-Ф14mm |
Ф4mm-Ф20mm |
Ф12mm-Ф30mm |
Rated Voltage |
220V 50/60Hz |
220V 50/60Hz |
220V 50/60Hz |
Motor Power |
160W |
160W |
250W |
Rotation Speed |
4,400 rpm |
Grinding Wheel |
CBN (for high speed steel), SDC (for tungsten steel) |
Certification |
CE |
Warranty |
1 year |
Dimension |
35*23*24cm |
35*23*24cm |
40*28*31cm |
Weight |
15.3kg |
15.3kg |
27.3kg |
End Mill Sharpener Structure Diagram

End Mill Sharpener Effect Diagram

End Mill Sharpener Packing List

|
Configuration |
Quantity |
T-MCG-X3 |
T-MCG-X3A |
T-MCG-X5 |
1. End mill sharpener machine |
1 |
1 |
1 |
2. SDC/CBN grinding wheel |
1 |
2 |
1 |
3. Fixture Collet |
6 (ER20) |
6 (ER20) 3 (ER25) |
10 (ER) |
4. Allen wrench |
3 |
3 |
3 |
5. Chuck set |
2 |
4 |
2 |
Tips: How to replace grinding wheel for end mill sharpener?
- Loosen the fixing screws of end mill sharpener, open protective cover of grinding wheel. Remove the fixing screws and fan blades, then take out the grinding wheel.
- Wipe clean the contact surface of grinding wheel and axis. Install the new grinding wheel into axis.
- Reinstall fan blades and fixing screws, and then tighten the fixing screws. Cover the protective cover of grinding wheel and lock housing fixing screws to complete replacement.