Search
All Categories
    Menu Close

    Tagged with 'how to'

    How to Choose Food Dehydrators?
    Food dehydrators, also called food air dryer or fruit belly dehydrator. It is a machine that uses low temperature to air dry fruits, vegetables, herbs, meat, etc. So how to choose a good dried fruit machine?

    food dehydrator fruits
    How to Choose Air Wrench
    Impact wrench, also known as ratchet wrench and power tool in general, is mainly a tool that provides high torque output with minimal consumption. It accelerates an object with a certain mass by a continuous power source and then instantly slams into the output shaft, so that a relatively large torque output can be obtained.
    How to Operate Air Sander?
    Sander refers to some uneven, uneven thickness, does not meet the requirements of the process of materials and objects, through the sand cloth, grinding wheel, sandpaper, cloth, non-woven polishing wheel and other physical removal of the way to make it more smooth and flat, uniform thickness, the process to meet the standards of a method, used in a variety of veneer process production, standard structural parts production, toys and crafts industry, decoration and furniture industry, flooring wall panel building materials industry and so on. But how to operate air sander safely?details of sander
    How to Use an Air Nailer Correctly?
    Nowadays, air nailers are used in many industries. As this air tool appearing in more fields, the price of it has also attracted the attention of businesses in various industries. The air nail gun is an essential tool for many enterprises, it can not only fasten a lot of products, but also make a lot of metal or wood fix on the wall. It is also used for home decoration. In addition, you can loading nails according to the instruction in order to use the air nailer better.
    How to Maintain the Pneumatic Ball Valve?
    Pneumatic ball valve is a device operated by compressed air to open and close the valve. It just requires air source to work and the switching speed is very fast, which saves human resources and time to a great extent. In addition, it can carry out remote centralized control and do not need to go to the scene or high altitude and dangerous to bring manual operation, which greatly improve and ensure the safety of use. When the pneumatic ball valve in use cannot meet the operating requirements, or after a long period of operation in order to regular inspection and prevent accidents, it must be carefully maintained and repaired. Doing a good job in daily use and maintenance of pneumatic ball valve can effectively improve the efficiency of the use of products, and reduce unnecessary losses.
    How to Select the Best Aluminum Ladder?
    In our daily life, ladders are more and more widely used. When decorating at home, we all need the help of a ladder. There are many types of ladders. In terms of material, they can be divided into aluminum alloy, stainless steel, fiberglass, iron, wood, bamboo ladders and so on. The current ladders are basically made of aluminum alloy. Aluminum-alloy ladders are relatively safer than wooden ladders, and they are also very light to use. Therefore, how to choose a suitable aluminum ladder?
    How to Use a Laser Level?
    The laser level is widely used in the construction industry, is a measuring machine for measuring the level. It has the advantages of high accuracy, convenient use, fast and reliable, and can be used in surveying, large-area site surveying, floor level marking, settlement observation, etc. Tool.com will explain in detail the operation and control steps of the laser level for wholesale online. 1. Open the tripod, keep its height near the chest, keep the head of the frame roughly level, step on the toes into the soil, and then use the connecting screw to connect the equipment to the tripod. 2. First of all, we must understand the names and functions of the parts of the laser level and be familiar with their use. The laser line meter is made by fixing a laser device on the tube of an ordinary level telescope. The laser device consists of a nitrogen-neon laser and a prism light guide system.Best price laser levels for sale

    How to Calibrate Laser Level?
    The best laser level should meet the following conditions The level axis of the vial should be parallel to the collimation axis of the telescope's collimator. (Main condition) The collimation axis of the telescope does not change position due to focusing. (Main condition) The circular level axis should be parallel to the rotation axis of the rotary laser level. (Minor condition) The horizontal wire of the crosshair should be perpendicular to the rotation axis of the laser level. (Secondary condition) Inspection before calibration The principle of inspection and calibration sequence: The previous inspection items are not affected by the following inspection items. Inspection method: The leveling axis of the level should be tested and calibrated equally with the rotating axis.
    How to Use Charcoal Grills?
    Cover the grill's lid if necessary: Hot dogs, hamburgers and other food intended for fast cooking can be grilled without a lid. If you have any food for slow cooking, such as boned chicken or loin chops, just cover the lid on the grill. In doing so, indirect heat is increased to help cook food thoroughly. If you need to cook food for a long time, you should add new charcoal every 30 or 60 minutes. Don't lift the cover frequently to check your food because it will lead to heat loss.
    How to Read a Steel Tape Measure?
    The steel tape measure is measured in centimeters. The red “10” means 10 centimeters, and the cells in centimeters mean millimeters. Steel tapes can be divided into self-rolling tapes, braking tapes, and rolling tapes. The numbers on the metal tape measure are divided into two rows, the unit of one row is cm, and the unit of the other row is inches. 1cm≈0.3937 inches, 1 inch≈2.54cm. Therefore, when the difference between the two numbers is small, the unit uses centimeters, and when the difference is large, the unit uses inches. The font of numbers in centimeters is also smaller than that of inches.Detail of steel tape measure

    How to Clean a Grill
    To clean the grill with greater ease, you should mix vinegar, lemon juice, and a sauce containing soy sauce for marination and sprinkling. Next, place all cleaning tools near the barbeque tool so that they can be used more conveniently and faster. Meanwhile, it also helps to develop the habit of cleaning the grill after using it. You'd better smear the barbeque sauce with ketchup a few minutes before food is taken out of the oven to reduce the workload of scrubbing. Prepare a piece of tin foil if you have no brush suitable for cleaning the grill. Firstly, fold the tin foil paper into a ball with a 3cm diameter, clamp the grill with a food clip, and scrub it bit by bit. Next, scrub another metal strip after cleaning one. The grill should be cleaned thoroughly at least once a year.
    How to Use the Ultrasonic Thickness Gauge?
    Ultrasonic thickness gauge working principle Ultrasonic thickness gauge mainly adopts the principle of ultrasonic pulse reflection method to measure the thickness of materials and objects conveniently and quickly, so as to realize the most basic thickness measurement function. Ultrasonic thickness gauge applications Ultrasonic thickness gauge is mainly used to detect hard materials (steel plates, glass, etc.). However, soft materials (such as sofas, sponges, etc.) cannot be measured with an ut thickness gauge. In addition, when testing the thickness of the material, attention should be paid to the sound velocity of the material being measured. The sound velocity of different materials is different. Best price ultrasonic thickness gauge

    How to Choose Right Electric Screwdriver?
    Compared with ordinary electric drills, firstly the electric screwdriver adds the "setting torque" function, that is, it will jump out if the torque exceeds a certain torque, so it will not blindly twist the screw hole. Secondly it adds the forward and reverse gears to loosen and tighten the screw. Besides, it has added with the low speed gear to be more suitable for screwing. If the torque is too small, the screw can't be twisted, and if the torque is too large, it is easy to damage the product and cause serious slippage. Therefore, it is best to buy an electric screwdriver with precise torque settings with appropriate maximum torque, and multiple gear adjustments.
    How to Use Hydraulic Crimping Tools?
    Hydraulic crimping tool, also called hydraulic crimping pliers or crimper, is a hand-held hydraulic tool for crimping cables, lugs, terminals or connectors. This article will introduce the use methods for hydraulic crimping tool and the main points of daily maintenance.